Ultrasonic Filter Bag Ring Welding Machine

Three key factors that must be possessed by Package Ultrasonic Welding Machine:

1. The contact surface at the beginning of welding is small. In order to ensure deformation of the Ultrasonic Welding Machine weld interface, the initial contact surface on the weld interface is required to be small to ensure that the entire surface is heated uniformly and the melting temperature of the thermoplastic material is quickly reached.

2. Ensure proper alignment of the upper and lower workpieces. The 20K Ultrasonic Plastic Welder weldment design and sometimes the solder joint design should be designed with an alignment structure to ensure the proper positioning of the solder joints. Generally, the alignment of solder joints is carried out by positioning pins, solder joints pre-assembly or solder joint designs, such as tongue tenon solder joints.

3. Energy conversion. The solder joints design should maximize the contact area, so that the local high stress induced by the contact surface between the welding head and the solder joints is minimized, which also reduces the possibility of the solder joints being scratched. In addition, the solder joints design should minimize the distance between the solder joints and the contact surface of the weld head and the welding surface, and ensure that the entire solder joints maintains this distance. It must be noted that voids are avoided, otherwise ultrasonic vibrations will be hindered from propagating directly to the welding surface.

https://www.ultrasonicweldermfg.com/Ultrasonic_Quilting_Machine.html