Door Panel Hot Riveting Machine

Duplex door plate Hot Riveting Welding Machine model: BY-11080RM(QDH)
It should be applied to the riveting of automotive door panels, because the solder joints are relatively dense, and are divided into two stations for welding. The total number of riveting points is 110, and the temperature is independently controlled.
The equipment is operated in a standing position, moving the weld position of the product through the pneumatic slide.
10 sets of welding programs can be stored in advance, and the data interface can be operated in conjunction with the production line.
Originating fever device. Thermal riveting head temperature control, with temperature self-test, closed-loop control, multi-point independent temperature control, temperature control accuracy up to ±2 degrees.
Equipped with a man-machine interface, the Chinese and English interface is more intuitive to operate.
The cooling system is air-cooled by blowing air.
Production beat 45S-70S.
Ergonomic safety: Hot Riveting Machine For Door Panel is equipped with the installation of protective light grids, as well as anti-burn safety warning safety baffles.
Permission management: Device settings administrator and operator permissions.
The work surface height is 900MM. (Standing operation)
The device is started in a two-handed manner.
Equipment capability Abuse operation verification (equipment is protected if it is not operated in accordance with standard procedures).
Quality traceability Capacity recording requirements.
Alarm fault code and its recording.
HMI - Visual information of HMI includes current operating steps, alarm information and solutions.
IMS interactive function: support Ethernet communication, the device has a two-dimensional code scan code recognition function, hot riveting temperature, displacement, hot riveting time data can be recorded and need to push the data to the company's IMS system.
Equipment fixtures 
Plastic Hot Riveting Welding Machine can be equipped independently with a mold change trolley.
Quick mold change, the fixture of the equipment adopts a simple, fast and reliable fixing method such as a positioning pin, without the need for special tools.
The pneumatic part and sensor part of the fixture of the device are designed for quick plug-in.
Fast mold change time 25-30 minutes.
Appliance layout Equipment fixtures are equipped with sensor identification, PLC selected a model different from the current fixture, to alarm.
Safety Lock Function - When the product is detected in NOK, the product is locked in the local station (a designated person is required to unlock it).
Equipment alarm, display fault information on the man-machine interface or have a corresponding fault.
Control system voltage DC24.
I/O - Each station I/O has a 10% margin for later expansion.
Technical parameters 
Device dimension (L) 2050MM*(W)2200MM*(H)2600MM.
The maximum mold size of the equipment (L) is 1100MM*(W)800MM*(H)650MM.
Power supply specifications: 3 phase 380V 50Hz, if there are special needs, customer confirmation is required.
Air supply specification: 4Kg/cm2-6Kg/cm2 (about 0.4MPA-0.6MPA).
Adaptable ambient temperature Temperature: -5°C~40°C
Adaptive Ambient Humidity: 20%~80%
The noise of the transmission part shall not exceed 70 decibels.

parameter