Lubricating Oil Drum Cover Welder

In the process of use, the Ultrasonic Welding Machine of oil drum cover will have the failure of whistle, heat and overload. Different failure conditions have different causes, and our corresponding measures are different. For example, the frequency of heat failure in ultrasonic metal welding machine is relatively high, so it is necessary to pay attention to heat dissipation. The welding horn of the Plastic ultrasonic welding machine is relatively easy to crack, so pay attention to the standardized use of the welding horn. We can take a look at what are the causes of the failure of the ultrasonic welding machine, and how to avoid it.
The oil drum lid Plastic Ultrasonic Welding Machine appears to scream and follow, one is the crack in the welding horn, the second is the screw is loose, and the third is that the welding head is in contact with the improper workpiece. For example, if you use an ultrasonic metal welding machine to weld plastic, it will definitely not be welded, and it will produce a screaming phenomenon. The phenomenon of heat generation is the heat generated by the operation of the machine, and the long-term operation and improper use will cause the machine to produce too high a temperature, resulting in the failure of the 20K Ultrasonic Plastic Welder.

parameter

According to the cause of the failure of the ultrasonic welding machine, we can take different measures. First of all, we must standardize the use of the machine, can not be crowned and worn, and operate according to the instructions for use. Secondly, it is necessary to make regular inspections of the machine, check whether the screws of the machine are loose, whether the welding head is normal, and do a good job in daily machine maintenance. It is also necessary to do the cooling treatment of the machine, and to ensure ventilation in the workshop. Some ultrasonic metal welding machines will also use water for physical cooling, but it must not affect the quality of welding products.
In the use of ultrasonic welding machine, we only need to standardize the operation of workers, regularly repair and maintain the machine, while maintaining a good working environment, we can reduce failures. Different oil drum lid welding machines have different failure situations, which should be handled specially. Like the ultrasonic metal welding machine can be heated with water for heat dissipation treatment, but the same situation is not applicable to the Ultrasonic Plastic Welding Machine. Reducing the failure of the machine and prolonging the service life of the ultrasonic welding machine can reduce the generation of defective products and increase revenue.