Ultrasonic Welding Machine For Washing Machine Panel

When welding with Ultrasonic Welding Machine, the processing conditions of the washing machine plastic panel have a very important influence on the welding effect, because the washing machine panel workpiece will get different welding effects and different welding processing forms under different processing conditions such as injection molding, blow molding or extrusion. The specific effects are as follows:
1. Humidity defects
Moisture defects are more common in streaked or loose plastic parts. During the welding process, moisture will attenuate energy, destroy the seal, and increase the welding time, so the plastic parts must be dried before welding.
2. Injection molding process
The influence of the adjustment of the process parameters of the spray washing machine panel on welding is as follows:
(1) Dimensional change
(2) Weight changes
(3) Surface damage
(4) The uniformity is not good
3. Recycle plastic
Recycled plastics have low strength and poor adaptability to ultrasonic welding. When welding with recycled plastic, special attention should be paid to the design dimensions.
4. The plastic panel of the washing machine has impurities
Plastic parts are generally mixed with some silos or release agents, some are specially placed, some are accidentally mixed, these will affect the welding effect of the ultrasonic welding machine, although the Ultrasonic Plastic Welder can remove impurities during processing, but it is recommended to remove as much as possible in the Ultrasonic Welder.