Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Model No.: DZ-RT150
Brand: DIZO
Warranty Period: 1 Year
Core Selling Point: Automatic, High Safety Level, Easy To Operate, High Rigidity, High-Accuracy, Competitive Price, Energy Saving
Out-of-warranty Service: Online Support
Where To Provide Local Services (in Which Countries Are There Overseas Service Outlets): None
Applicable Industry: Other
Showroom Location (in Which Countries Are There Sample Rooms Overseas): None
Marketing Type: New Product 2020
Mechanical Test Report: Provided
Video Factory Inspection: Provided
Voltage:: 220v
Model:: DZ-RT150 Geomembrane welding machine
Power:: 1100w/1300w
Overlap Width: Overlap width
Application:: Climbing welder suitable for PE,PVC, HDPE,EVA, PP,LDPE,ECB,PPR,Welding of drainage plates, composite membranes, and a series of hot-melt materials
Weld Article Number: 2/3
Weld Width: 17mm
Cavity: 12mm
NW(KG):: 5kg
Packaging: export wooden box
Productivity: 1000unit
Transportation: Ocean,Air,Express,Land
Place of Origin: wuxi
HS Code: 8515809090
Port: shanghai,noingbo,shenzhen
Payment Type: T/T,L/C,D/P,D/A,Paypal
Incoterm: DDP,FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,DEQ,DDU,Express Delivery,DAF,DES
parameter
Climbing welder suitable for PE,PVC, HDPE,EVA, PP,LDPE,ECB,PPR,Welding of drainage plates, composite membranes, and a series of hot-melt materials
Model
DZ-RT100
Price
$400-$480
Application
Advantage
01.Digital circuit control 02.Heating system 03.Pressure system 04.Pressure regulation
Voltage/frequency
220V/50HZ
Power
1100W/1300W
Welding speed
0-5M/min
Heating temperature
0-450℃
Overlap width:
150mm
Weld article number
2/3
Weld width
17mm
Cavity
12mm
Weight
5KG Welding strength
≥90% base material (tensile resistant in shear direction)
Video
Geothermal Welding Machine Welding procedure/Hdpe Geomembrane Welding Machine
Since the welding quality of this machine is directly related to the working speed and temperature setting, in order to achieve high-quality welding results, it must be operated by professional person.
1. The user must select a three-core power cord and a three-plug socket that must not be less than 10A. (The operation corresponds to the Geomembrane Hdpe Liner Welding Machine plug L-phase connected to the live wire, N-phase connected to the neutral wire, and the ⊥-phase grounding protection wire). After pressing down the handle of the press lever to make the press wheel in a separated state, plug in the power plug.
2. Turn on the power switch, select a certain temperature and speed, and take a few squeezed materials to test welding. Due to the ambient temperature and the thickness of the material, the welding temperature of the same material is different, and the speed (about 2m/min) does not change. In this case, select the temperature to adjust slowly from low temperature to high temperature (about 250°C -350°C) to determine the best welding effect.
3. Judgment of welding temperature. For transparent PE materials, Hdpe Geomembrane Welding Machine can be directly observed. The weld mark is flat and transparent, and the surface speed and temperature are appropriate. The weld mark appears severely broken, indicating that the temperature is too high or the speed is too slow, such as welding. The traces are opaque and white, indicating that the temperature is too low or the speed is too fast. For opaque materials, observe whether there are obvious welding traces. You can also wait for it to cool down and perform a tensile test.
4. Trim the edge of the material to be welded straight, face forward, and overlap the lower left and upper right.
5. After determining the temperature and speed, insert the material to be welded between the two pressing wheels, make the body parallel to the edge of the base material, and close the handle of the pressing rod to weld by itself. In general, the operator only needs to observe Whether there is any deviation of the weld mark on the edge of the base metal, and correct it in a small range in time.
6. When the material is welded to the end, press down the handle of the pressing rod in time to make the upper and lower pressing wheels separate. So as not to burn the rubber wheel for too long.
7. Due to thermal inertia, if the temperature is too high or too low during the welding process, the speed can be adjusted in a small range to compensate for the temperature deviation.
8. The welding method of the welded material and another material into a "T" type lap welding is as shown in (Picture 3). Place the lap on the side of the hot wedge close to the welding mark and cut the length about 150mm obliquely.
Product Categories : Geomembrane Welding Machine
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.